V2.2
2022 RUNGU Dualie Rugged/XR series
Copyright 2021 Standard Bearer Machines, LLC
18
66.
The ends of the axle will sit in the fork “dropouts” when correctly aligned. You may have to
unscrew the end cap a turn or two if the fork
doesn’t drop in place.
67.
Tighten the end cap nut on the LEFT wheel and close the quick-release lever. As a guideline the
end cap nut should begin to clamp onto the fork drop out when the lever points away from the
wheel at a right angle.
WARNING: MAKE SURE TO TIGHTEN THE QUICK-RELEASE IN THE FORK SO THAT THE WHEEL
CANNOT FALL OUT OF THE FORK; FAILURE TO ADEQUATELY TIGHTEN THE QUICK-RELEASE CAN
RESULT IN ACCIDENTAL RIDER INJURY OR DEATH.
