Standalone N6 Series, User Manual, Page: 81 / 234

71
CTRL 12V Control power output. The power output is off when the alarm is
canceled.
+12V It is rated power output.
Earth cable.
485 A/B 485 communication port. They are used to control devices such as
PTZ. Please parallel connect 120T
Ω between A/B cables if there are
too many PTZ decoders.
3.8.1.4 HD-SDI 1080P 1.5U Series
The HD-SDI 1080P 1.5U series product interface is shown as in
Figure
3-5
.
Figure 3-5
You can refer to the following sheet for alarm input and output information.
1
，
2
，
3
，
4
，
5
，
6
，
7
，
8
，
9
，
10
，
11
，
12
，
13
，
14
，
15 ， 16
ALARM 1 to ALARM 16. The alarm becomes active in low voltage.
NO1 C1
，
NO2 C2 ，
NO3 C3
，
NO4 C4,
NO5 C5 NC5
The first four are four groups of normal open activation output
(on/off button)
NO5 C5 NC5 is a group of NO/NC activation output (on/off button)
CTRL 12V Control power output. The power output is off when the alarm is
canceled.
+12V It is rated power output.
Earth cable.
485 A/B 485 communication port. They are used to control devices such as
PTZ. Please parallel connect 120T
Ω between A/B cables if there are
too many PTZ decoders.
T+, T-, R+, R-
4-pin full-duplex RS485 port. T+
，
T- are the output cable and R+
，
R- are input cable.
3.8.1.5 960H 4HDD 1.5U Series
The 960H 4HDD 1.5U series product interface is shown as in Figure 3-6.