Standalone N6 Series, User Manual, Page: 182 / 234

172
Please refer to the following sheet for detailed information.
Parameter Function
Channel
Please select a channel first.
Pre-record Please input pre-record value here.
System can record the three to five seconds video before activating
the record operation into the file. (Depends on data size).
Setup
z
In Figure 7-32, click set button, you can go to the corresponding
setup interface. See Figure 7-33.
z
Please set schedule period and then select corresponding record
or snapshot type: schedule/snapshot, motion detection/snapshot,
and alarm/snapshot.
z
Please select date (Current setup applies to current day by default.
You can draw a circle before the week to apply the setup to the
whole week.)
z
After complete setup, please go back to Figure 7-32 and then click
save to save current time period setup.
Holiday Click Set button, system pops up a dialogue box shown as in Figure
7-34.
Here you can set holiday date. Check the box, it means current chann
shall record as your holiday setup. Please go to the Period interface to
set the holiday date record setup.
Copy It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels. The interface is shown as in
X460H460H460H
Figure
7-31.
Save You can click save button after you complete setup for one channel,
or you can complete the whole setups and then click save button.
Refresh Click this button to get device latest configuration information.
7.5.2.4 RS232
The RS232 interface is shown as in Figure 7-35.