background image

LIMITED WARRANTY 

 

  Each Stand Aid of Iowa, Inc. product has been care-
fully inspected and tested before shipment.  According-
ly,  we  warrant  each  STAND  AID  which  is  sold  against 
defects in workmanship and material under normal use 
for one year and the batteries which are warranted for 
90  days.    This  warranty  shall  not  extend  to  and  we 
shall  have  no  responsibility  with  respect  to  products 
which  have  been  abused,  misused,  altered  or  as  to 
which repair has been made or attempted by others. 
 
  This warranty is made in lieu of all other warranties 
with  respect  to  the  product  covered  hereby  and  there 
are no other warranties, whether expressed or implied, 
of merchantability or otherwise, except the warranty ex-
pressly  stated  herein.    The  remedy  set  forth  herein 
shall  be  the  sole  exclusive  remedy  of  any  purchaser 
with  respect  to  any  defective  product.    Under  no  cir-
cumstances shall STAND AID of IOWA be liable for any 
injury,  loss,  damage  or  expense  suffered  or  incurred 
with  respect  to  any  misuse  of  STAND  AID  of  IOWA’S 
products. 
 
  If  you  have  any  questions  or  need  further  infor-
mation, please feel free to call our offices at: 1-800-831
-8580. 

 

Page 4

 

Summary of Contents for 1501


















Reviews: