GENERAL INFORMATION
After unpacking your Stand Aid, place any parts that are not at-
tached to the Stand Aid on the floor, using the parts list to get familiar
with the unit and parts. On the standard Stand Aid there should be no
tools needed to adjust the unit for your standing pleasure. Check
your packing list for the options that came with your unit.
All Stand Aid models should be used only on level, smooth
surfaces. Please exercise caution and good judgement when
operating your unit.
INTRODUCTION
Thank you and congratulations on your purchase of the STAND AID
Model 1501. We are certain the benefits you receive from standing with
our Stand Aid will enhance your health and outlook on life.
Quick Overview of Standing Instructions
1. Place sling under buttocks securely.
2. Adjust frame to desired height, making sure all knobs are tight.
3. Make sure table is adjusted high enough so that lift arms don’t come in contact
with table, causing damage.
4. Open Safety Gate, place your feet onto the floor of the Stand Aid in the Heel
Straps and Toe Straps. Bring Lift Arms down to your lap, and place the Slings D-
ring onto the Lift Arm Hook Slides, making sure they are secure on the Slides.
5. Run Lift Arms up slowly, make sure the sling is under the buttocks correctly,
for first time users go up slowly until you are at a vertical position.
6. After you are in the up position, close the Safety Gate into the locked position.
7.
Stand Aid recommends that you have someone there when you are
stand-
ing for the first time.