Assembly Instructions
With optional SAFETY GATE
LATERAL BACK SUPPORT
The “SAFETY GATE and LATERAL BACK SUPPORT” can also be added
for those requiring more back support. This attachment easily clamps onto the
Safety Gate and comes with an extra safety belt to hold the upper body snug
against the back rest. This Kit includes the Safety Gate kit without the standard
back support. The standard back support is replaced with the back support be-
low.
1
2
3
4
5
6
7
8
14
9
10
10
11
12
13
SAFETY GATE
Parts List
1.
82132025
1
Gate Latch
2.
82102026
1
Safety Gate
3.
82112023
1
Swivel Hinge
4.
82122024
1
Gate Mount
5.
82202029
1
Back Support Mount
6.
82002045
4
Back Support Mount Links
7.
82222031
1
Back Support Adjust
8.
82212030
1
Back Support Vertical Slide
9.
82252034
1
Back Pad Mount
10.
82002038
2
Outside Pad Mount
11.
82002037
2
Slide Adjust
12.
26003012
2
Outside Wide Pad
13.
26003010
1
Back Support Pad
14.
25003000
6
Adjustment Knob
15.
25003011
1
1/4” Lock Pin (not shown)
REF. # PART # QTY.
DESCRIPTION
LATERAL BACK SUPPORT
2. Assemble the back support adjustment assembly (#5, #7, & #8)
by sliding the tubes together, #8 slides into #7, and slides over
the back support mount (#5), attach using lock Pin (#16) . Secure
the adjusting knob (#15) at desired height. Attach this assembly to
the safety gate using the mounting strips (#6) and 1/4“ X 1-1/2“
bolts and locknuts.
3. Attach the back pad (#13) to the back pad mount (#9) with
10-24 x 1/2“ bolt. Insert this assembly into the back support verti-
cal slide (#8), and secure with the adjusting knob (#14).
4. Attach the outside pads (#12) to the outside pad mounts (#10) us-
ing 10-24 x 1/2” bolts. Slide these assemblies into the slide
adjusts (#11). Slide these assemblies onto the back support adjust
(#7), and secure with the adjusting knobs (#14). Width
adjustment may be required later.
Page 10
1. Attach the safety gate assembly (#2, #3 , & #4) to the
frame by tightening the gate mount clamps around
tube. Height adjustment may be required later.
6
14
