ASSEMBLY INSTRUCTIONS
STEP 12
Run the
LEG CURL CABLE(34),
1280mm (50.4") long, through the
SUPPORT FRAME(9)
and attach
to the
SUPPORT FRAME(9)
with a
SMALL PULLEY(36),
a
BOLT(3/8" x 2 1/4")(71),
two
SHORT
PULLEY SPACERS(37),
two
WASHERS(3/8")(78),
and a
NYLOCK NUT(3/8")(81).
STEP 13
Attach the
LEG CURL FRAME(11)
onto the
SUPPORT FRAME(9)
with
BOLT(3/8" x 3")(73),
WASHERS(3/8")(78),
and
NYLOCK NUT(3/8")(81).
Make sure that the brackets on the
LEG CURL
FRAME(11)
are in the position shown in the illustration above.
Attach the
LEG CURL CABLE(34)
onto the Bracket on the
LEG CURL FRAME(11)
with
BOLT
(M8 x 32mm)(65), WASHERS(M8)(77),
and
NYLOCK NUT(M8)(80).
Connect the
LEG CURL
CABLE(34)
to the
BOTTOM CABLE(32)
with the
HOOK(38).
STEP 14
Slide a
FOAM PAD(19)
onto the
LONG PAD TUBE(17),
then insert the other end of the
LONG PAD
TUBE(17)
through the hole on the
SUPPORT FRAME(9).
Slide another
FOAM PAD(19)
over the
protruding end of the
LONG PAD TUBE(17).
Repeat for assembling the
FOAM PADS(19)
onto the
LEG CURL FRAME(11)
with
PAD TUBES(18).
10
