background image

TABLE OF CONTENTS

Safety Instructions

  2

Before You Begin

  4

Equipment Warning & Notice Labels

  5

Hardware Identification Chart

  6

Assembly Instructions

  7

Set Up Instructions

 11

Operational Instructions

 12

Storage

 14

Maintenance

 14

Conditioning Guidelines

 15

Warm-up and Cool-Down

 16

Warranty

 17

Product Parts Drawing

 18

Parts List

 19

Notes

 21

Fax/Mail Ordering Form

 22

Page

Page

SAFETY INSTRUCTIONS

To reduce the risk of serious injury, read the following Safety Instructions before
using the Magnetic Fusion 4545 Bike.

WARNING:

2

Before starting any exercise or conditioning program you should consult with your personal
physician to see if you require a complete physical exam. This is especially important if you
are over the age of 35, have never exercised before, are pregnant, or suffer from any
illness. 

READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

THESE INSTRUCTIONS CAN RESULT IN SERIOUS BODILY INJURY.

WARNING:

1.
2.
3.
4.

5.

6.

7.
8.

9.

10.

11.

12.

13.
14.
15.

16.
17.

18.
19.

20.
21.
22.
23.
24.

Read all warnings posted on the 

Magnetic Fusion 4545 Bike.

The 

Magnetic Fusion 4545 Bike

 should only be used after a thorough review of the Owner's Manual.

We recommend that two people be available for assembly of this product.
Keep children away from the 

Magnetic Fusion 4545 Bike. 

Do not allow children to use or play on the 

Magnetic

Fusion 4545 Bike. 

Keep children and pets away from the 

Magnetic Fusion 4545 Bike

 when it is in use.

The 

Magnetic Fusion 4545 Bike

 is not a freewheeling exercise bike; therefore, pedal speed should be reduced

in a controlled manner to prevent injury from spinning pedals.
Make sure the 

Magnetic Fusion 4545 Bike

 is properly assembled and that all nuts and bolts are tightened

before use.
It is recommended that you place this exercise equipment on an equipment mat.
Set up and operate the 

Magnetic Fusion 4545 Bike

 on a solid level surface. Do not position the 

Magnetic

Fusion 4545 Bike

 on loose rugs or uneven surfaces.

Make sure that adequate space is available for access to and around the 

Magnetic Fusion 4545 Bike.

Adjust the LEVELING CAPS(53) and STAND(54) so that the 

Magnetic Fusion 4545 Bike

 sits on the floor

without rocking. See page 11 for detailed leveling instructions.
Before using, inspect the 

Magnetic Fusion 4545 Bike

 for worn or loose components, and tighten or replace

any loose or worn components prior to use.
Before using, always check the Seat Frame to be sure it is secure. The ADJUSTMENT KNOB(50) must be
inserted into one of the holes in the Rear Frame and tightened.
Each user should adjust the seat per instructions on page 12.
Do not attempt to adjust the seat while you are on the 

Magnetic Fusion 4545 Bike.

Consult a physician prior to commencing an exercise program and follow his/her recommendations in developing
your fitness program. If at any time during exercise you feel faint, dizzy, or experience pain, stop and consult
your physician.
Follow your physician's recommendations in developing your own personal fitness program.
Always choose the workout which best fits your physical strength and flexibility level. Know your limits and train
within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the 

Magnetic Fusion 4545 Bike.

Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or cross training
shoes that fit well, provide foot support, and feature non-skid rubber soles.
Care should be taken in mounting or dismounting the 

Magnetic Fusion 4545 Bike.

The 

Magnetic Fusion 4545 Bike

 should not be used by persons weighing over 300 pounds.

The 

Magnetic Fusion 4545 Bike

 should be used by only one person at a time.

Do not ride the 

Magnetic Fusion 4545 Bike

 while standing up.

The 

Magnetic Fusion 4545 Bike

 is for consumer use only. It is not for use in public or semipublic facilities.

Summary of Contents for fusion 15-4545























Reviews: