ASSEMBLY INSTRUCTIONS
10
STEP 8
NOTE:
The
RIGHT PEDAL(36)
has
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL(36)
has
right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(35)
has
L
stamped on
the end of the pedal shaft. The
LEFT PEDAL(35)
has left hand threads and is tightened by turning
counterclockwise.
Thread the
RIGHT PEDAL(36)
into the right side of the
CRANK(7)
as shown. Tighten the pedal securely.
Do the same to attach the
LEFT PEDAL(35)
to the left side of the
CRANK(7).
STEP 9
Install four AA batteries into the
METER(27)
(four batteries included). See page 13 for detailed battery
installation instructions. Run the
EXTENSION WIRE
on the
METER(27)
through the
METER POST(26).
Attach the
METER(27)
to the
METER POST(26)
with
ROUND HEAD SCREWS(M5x0.8x10mm)(64).
STEP 10
Plug the
MOTOR CONTROL WIRE(28)
and
FRONT EXTENSION WIRE(37)
to the
EXTENSION WIRE
on
the
METER(27).
Insert the
METER POST(26)
onto the
FRONT FRAME(1)
and secure with
ROUND HEAD
BOLTS(M6x1x15mm)(61), LOCK WASHERS(M6)(79),
and
ARC WASHERS(M6)(76).
NOTE:
Be careful not to damage the wires when attaching the
METER(27).
Summary of Contents for fusion 15-4545
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 21: ...21 NOTES...