OPERATIONAL INSTRUCTIONS
SEAT ADJUSTMENT
LOAD ADJUSTMENT
CAUTION:
1.
2.
Rotate the
ADJUSTMENT KNOB(50)
counterclockwise until the pin releases when the knob is pulled.
Pull the
ADJUSTMENT KNOB(50)
and slide the
SEAT FRAME(5)
up or down to desired position. Lock
the
SEAT FRAME(5)
in position by inserting the pin of the
ADJUSTMENT KNOB(50)
into one of the
adjustment holes in the
REAR FRAME(3),
then rotate the
ADJUSTMENT KNOB(50)
clockwise to lock
the
SEAT FRAME(5)
securely.
Sit on the seat and place your feet on the pedals. You should be able to move through a complete pedal
stroke without locking your knees or shifting your hips on the seat. The seat is too close to the pedals if
you have more than a slight bend in your knees at the bottom of the pedal stroke. The seat is too far from
the pedals if you have to completely straighten your knees at the bottom of the pedal stroke.
1.
2.
Proper seat adjustment is important. There are twelve adjustment holes in the
REAR FRAME(3).
These
adjustment holes allow users to adjust the position of the seat for efficient exercise.
Do not attempt to adjust the seat while you are on the
Magnetic Fusion 4545 Bike.
Always tighten the
ADJUSTMENT KNOB(50)
after adjusting the seat to a new position.
12
Down Button(43)
Up Button(42)
To increase the load, press the
UP BUTTON(42)
on the right
HANDRAIL(6).
To decrease the load, press
the
DOWN BUTTON(43)
on the left
HANDRAIL(6).
Summary of Contents for fusion 15-4545
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 21: ...21 NOTES...
