OPERATIONAL INSTRUCTIONS
14
PEDAL ARM RESISTANCE ADJUSTMENT
Loosen the
ADJUSTMENT KNOB(26)
,
but do not remove,
then pull the
ADJUSTMENT KNOB(26)
to release the pin.
Slide the
SLIDER(5)
up or down to desired position. Release
the
ADJUSTMENT KNOB(26)
making sure the pin catches in
one of the holes of the
SPRING SUPPORT(6).
Always tighten
the
ADJUSTMENT KNOB(26)
after adjusting the
SLIDER(5)
to a new position.
Move the
SLIDER(5)
to higher position for more spring tension
resistance. Move the
SLIDER(5)
to lower position for less
spring tension resistance. When the
PEDAL ARMS(32, 33)
are connected you may choose to use only one
SPRING(3)
if less resistance is desired.
STORAGE
1. To store the
AeroPilates® Precision Pilates Chair,
simply keep it in a clean dry place.
2. It is recommended that two people be available to move the
AeroPilates® Precision Pilates Chair.
3. Lift from the
LEFT
and
RIGHT FRAMES(2, 20)
to move.
The safety and integrity designed into the
AeroPilates® Precision Pilates Chair
can only be maintained
when the
AeroPilates® Precision Pilates Chair
is regularly examined for damage and wear. Special
attention should be given to the following:
MAINTENANCE
1. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
2. Worn or damaged components must be replaced immediately or the
AeroPilates® Precision Pilates
Chair
removed from service until repair is made.
3. Verify that the
CAUTION LABEL(41)
is present and legible. Replace the
CAUTION LABEL(41)
if it is
missing or damaged.
4. Check the condition of the
SPRINGS(3).
Replace the springs that are damaged.
5. Check the
FOAM GRIP(38)
and
HAND GRIP(39).
Replace if damaged or worn.
6. Check the
CUSHIONS(10)
,
replace if any of them is damaged or worn.
7. Only Stamina Products supplied components should be used to maintain/repair the
AeroPilates®
Precision Pilates Chair.
8. Keep your
AeroPilates® Precision Pilates Chair
clean by wiping with an absorbent cloth after use.
32
33
26
6
5
3
