ASSEMBLY INSTRUCTIONS
10
STEP 11
NOTE:
The
RIGHT PEDAL(52)
has
R
stamped on the end of the pedal shaft. The
RIGHT PEDAL(52)
has
right hand threads and is tightened by turning clockwise. The
LEFT PEDAL(43)
has
L
stamped on the end
of the pedal shaft. The
LEFT PEDAL(43)
has left hand threads and is tightened by turning counterclockwise.
Thread the
RIGHT PEDAL(52)
to the
RIGHT CRANK(51)
as shown. Tighten the pedal securely. Refer to
the detail view below. The shoulder of the
PEDALS(43, 52)
should be in contact with the
CRANKS(44, 51)
when securely tightened. Select the
RIGHT PEDAL STRAP(97)
which has
R
marked on the bottom side of
the strap. Snap the three hole end to the inside edge of the
RIGHT PEDAL(52).
Snap the other end to the
outside edge of the
RIGHT PEDAL(52)
with the
R
mark on the bottom of the
RIGHT PEDAL STRAP(97).
Select adjustment holes which allow your foot to be easily removed from the pedals.
Repeat on the left side in order to attach the
LEFT PEDAL(43)
to the
LEFT CRANK(44)
and snap the
LEFT
PEDAL STRAP(96)
to the
LEFT PEDAL(43).
STEP 12
Refer to the illustration. Pry the
METER(19)
from the
DESKTOP(21).
Install two AAA batteries into the
METER(19),
the batteries are not included. See page 12 for detailed battery installation instructions. Press the
METER(19)
back to the
DESKTOP(21).
Plug the
CONNECTION WIRE(59)
into the wire of the
METER(19).
Shoulder
Shoulder
Shoulder
Summary of Contents for 85-2221A
Page 3: ......
Page 20: ...PRODUCT PARTS DRAWING 20 FRONT BACK...
Page 24: ...NOTES 24...
Page 25: ...NOTES 25...
