Stamina 35-1435, Owner'S Manual

Page: 16 / 26

HOW TO FILL AND EMPTY THE TANK
1. Remove the FILL PLUG(17) from the RIGHT TANK(13).
2. To fill with water, refer to illustration A. Use the SYPHON PUMP(27) and a bucket to fill the tank.
Use Water Level Gauge on the side of the tank to measure the volume of water in the tank and fill to the
desired level.
3. To empty tank, refer to illustration B. Place a bucket next to the rower. Use the
SYPHON PUMP(27)
to
pump out the water from the tank into the bucket.
4. Once completed, insert the FILL PLUG(17) into the RIGHT TANK(13). Please wipe excess water from
the unit after filling.
NOTE:
OPERATIONAL INSTRUCTIONS
A. B.
Water Level Gauge
1. Fill the tank only with municipal water, do not use well water. If municipal water is unavailable,
use distilled water and add a water purification tablet. NEVER USE POOL CHLORINE OR
CHLORINE BLEACH. Refer to the Maintenance section for more advice on water treatment.
2. The water in the tank is not for human or animal consumption. Please safely dispose of the
water properly after removal from the tank.
16
WATER LEVEL
Refer to illustration A. The Water Level Gauge is positioned on the right side of the tank. The maximum
level to fill the tank is Level 6. DO NOT fill above the Maximum Level - this could void the warranty. The
standard calibration level is Level 5.
The amount of resistance is dictated by the amount of water in the tank. For example Level 2 of water
offer light resistance, Level 5 offers the heaviest resistance.