Stamina 35-1435, Owner'S Manual

Page: 15 / 26

OPERATIONAL INSTRUCTIONS
HOW TO INSTALL AND REPLACE BATTERIES:
1. Unclip the Meter(73) from the Left and Right Covers(46, 45).
2. The meter operates with two AAA batteries (1.5V each), the
batteries are not included. Refer to the illustration to install or
replace the batteries.
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline
battery with another type of battery.
3. Rechargeable batteries are not recommended.
4. Ultimate disposal of battery should be handled
according to all state and federal laws and regulations.
5. Do not dispose of batteries in fire.
NOTE:
AAA Batteries
15
müüv
CONNECTION OPERATION
NOTE:
1. To fully operate your Stamina® Wave Water Rower
1435 you will need to download the free müüv app.
2. You will need to enable bluetooth in your phone settings
first.
Power on the Meter on your Stamina® Wave Water Rower 1435. Open the müüv app and follow the
following process to connect the Meter to the müüv app. It will make your Stamina® Wave Water Rower
1435
work with the
müüv
application and many others. For more details and information, go visit https://
müüv.fit.
NOTE:
Under low battery conditions, the
METER(73)
may still work, but may make the
müüv app
unable
to find the bluetooth device to connect. Please pay attention to the issue and replace the battery
promptly.
Tap on the Setting
icon.
1
Tap on
ALL SETTINGS.
2
Tap on Connected
Devices.
3
Tap on Connect next
to the "SWRA-xxxxxx"
to connect.
4
SWRA-XXXXXX