OPERATIONAL INSTRUCTIONS
To adjust, loosen and pull the
UPRIGHT LOCKING LEVER
(49),
then lower or raise the
HANDLEBAR(10)
to the desired
height, and secure with the
UPRIGHT LOCKING LEVER(49).
NOTE:
The pin of the
UPRIGHT LOCKING LEVER(49)
must be inserted into one of the adjustment holes
in the
HANDLEBAR POST(13)
and the
UPRIGHT
LOCKING LEVER(49)
must be screwed in tight to
ensure that the
HANDLEBAR(10)
will fit securely in
the
MAIN FRAME(1).
FORWARD/AFT POSITION OF HANDLEBAR
Adjusting the
HANDLEBAR(10)
forward or backward helps
you find a comfortable position for your workout.
Loosen the
HANDLEBAR LOCKING LEVER(46),
slide the
HANDLEBAR(10)
to the desired position, and secure with
the
HANDLEBAR LOCKING LEVER(46).
NOTE:
The
HANDLEBAR LOCKING LEVER(46)
should
be screwed in tight to make the
HANDLEBAR(10)
fit securely in the
HANDLEBAR POST(13).
HANDLEBAR HEIGHT ADJUSTMENT
HANDLEBAR(10)
height is a matter of preference. Start with the
HANDLEBAR(10)
at the same height
as the seat. Adjusting the
HANDLEBAR(10)
higher will give the rider a more upright position; lowering the
HANDLEBAR(10)
will result in a more prone position.
23
SMART MOUNT ANGLE ADJUSTMENT
Adjusting the angle of the
SMART MOUNT(45)
helps you view the screen on your device properly. Refer to
the detail view below. To adjust, loosen the
LOCKING KNOB(95)
at the back of the
SMART MOUNT(45).
Adjust the
SMART MOUNT(45)
to the desired angle and secure with the
LOCKING KNOB(95).
