Stallion CWI-B1412, Setup And Operation Manual, Page: 7 / 25

Carefully unpack and remove the saw and its components from the box and check for damaged or missing
items as per the list of contents below. Report any damaged or missing items to your CWI distributor imme-
diately.
List of Contents Quantity
A- Saw ......................................................1
B- Table ......................................................1
C- Threaded lock knob .........................................2
D-
Table insert ......................................................1
E- Table pin ......................................................1
F- Stamped wrench ..............................................1
G- Allen key ......................................................2
H-
Hex head bolt & flat washer .............................4
I- Front rail tube ....................................................1
J- Rear rail tube ....................................................1
K- Rip Fence ......................................................1
L-
Large rail brackets............................................2
M- Small rail brackets ...........................................2
N- Lock knob with post .........................................4
O- Square nut ......................................................4
P-
Measuring tape ................................................1
*Q- Upper ball bearing guide ................................1
*R- Lower ball bearing guide ................................1
*Optional Accessory
Additional Tools Required
In addition to the tools supplied with the saw, you will need the
following tools during assembly and setup:
• Phillips Head Screwdriver
• Machinist’s Square
• Straight Edge
• A Friend to Help Lift
Unpacking
^
j
h
A
D
B
E
J
N
H
K
O
7
C
F
M
G
I
Q R
P
L