Stallion CWI-B1412, Setup And Operation Manual, Page: 6 / 25

6
Identification of Main Parts and Components
A- 14” Woodworking Bandsaw
B- Work Table
C- Rip Fence
D-
On/Off Switch
E- Quick Release Blade Tension Lever
F- 4” Dust Inlet
G- Gold Anodized Dovetail Ceramic Blade Guides
H- Rip Fence Locking Handle
I- Blade Tracking View Window
J-
Wheel Door Lock Knobs
K- LED Worklight
L- 1.75 HP Motor
A
B
C D
E
F
G
I
J
K
H
This saw has been designed for cutting solid wood as well as manufactured wood materials such as plywood, wood
panelling, particleboard, MDF, and other wood based products. This saw is not designed for cutting metals or any
other non-wood product.
This saw is designed for use with bandsaw blades having a width from 1/8” to 3/4”, and a length of 112”. With the
ceramic blade guides raised to their highest position and the table set at 90º, the maximum resaw capacity is 12”. The
work table can be tilted 5° to the left, and 45° to the right.
Pay close attention to the saw’s balance when lifting it; the saw is very heavy and could topple causing injury or ma-
chine damage. Use a forklift to lift the saw and ensure another person helps guide the machine into place. Once set,
the saw can be levelled and mounted to the floor or machine mounts for safety and stability.
Introduction
J
L