Stallion CWI-B1412, Setup And Operation Manual, Page: 11 / 25

Installing the Blade
Installing a Bandsaw Blade
Always unplug the saw and release the tension lever
before changing the blade on this bandsaw. Then,
remove the table insert (A) and table pin (B).
A
B
D
C
Unlock the cover latches (C), and open the upper and
lower wheel covers (D).
C
D
Slide the blade through the table slot (E), and slip it
between the guides (F).
Re-install the table pin and insert, tension the blade,
and adjust tracking as necessary. Every time a new
blade is installed, the guide assembly will require mi-
nor adjustment.
Removing a Bandsaw Blade
Blade removal follows the same process as instal-
lation, but in reverse. Always ensure that the saw is
unplugged and tension released before removing a
blade.
Slide the blade onto the upper (G) and lower wheels (H).
G
H
E
F
11