Stalgast 830130V02 Instruction Manual Download Page 18

- 18 -

EN

1. 

If the unit is not working, make sure that:

 

The power plug is properly inserted into the electrical outlet

 

Power cord is not damaged

2. 

If the temperature does not reach the set value, verify if:

 

The switch is in the ON position

 

The control panel is working properly (see „Alarms”).

 

The internal walls of the compartment are covered with frost (models

 

With gravity cooling) the condenser is blocked by dust

 

The appliance is not set up near a heat source or in an improperly ventilated room;

 

Products in the chamber do not block the door

 

The device is operating according to the operating instructions (too many products in the chamber, products are hot, pro-

ducts prevent proper air flow inside the chamber)

3. 

If water leaks from the appliance, verify whether:

 

The appliance is placed on a flat (level) surface. If the appliance

4. 

Produces too much noise, make sure that:

 

The screws and bolts on the frame have been tightened properly; the

 

Device has been leveled properly

If the unit does not work properly, contact an authorized service center. Enter the device model and the serial number visible on 

the nameplate and the alarm code (if present).

10. DISPOSAL OF THE OLD APPLIANCE

Information for users on the rules concerning proper disposal of electrical and electronic equipment at the end of its life.

 

Leave your old equipment in the shop where you purchase a new appliance. 

Each store is obliged to accept old equip-

ment free of charge if you buy there the new equipment of the same type and in the same quantity. The only condition is to 

deliver the old equipment to the store at your expense. 

 

Dispose of your old equipment at a collection point. 

Information about the location of the nearest collection point can be 

found on the local website or the notice board of the municipal office. 

 

Leave the equipment at a service point. 

If the repair of the equipment is unprofitable or impossible for technical reasons, 

the service is obliged to accept this appliance free of charge. 

 

Return the used equipment at the end of its life without leaving your home. 

If you do not have the time or ability to deli-

ver your equipment to the collection point, you can use the services of specialized companies. 

 

Remember! Do not dispose of used equipment together with regular waste.

 An illegal or incorrect disposal of the product will lead to high penalties being imposed.

The symbol of a crossed-out rubbish bin on the product, its packaging or its instruction manual means that at the 

end of its life the product must not be disposed of with regular waste. The user is obliged to deliver their used 

equipment to a designated collection point for proper processing.

11. GUARANTEE

The dealer of the appliance is liable under the guarantee. 
The guarantee does not cover any damage resulting from the build-up of limescale inside the appliance. The guarantee also does 

not cover: damage caused by external forces such as atmospheric discharge, voltage change, incorrect setting of electrical vol-

tage, power supply from unsuitable power outlet, any mechanical, thermal, chemical damage and defects resulting from them.

Furthermore, the guarantee does not cover the replacement of exhaustible parts, namely: light bulbs, rubber elements, heating 

elements damaged by limescale, glass and other elements that are exposed to any form of wear or usage, for example; burners, 

rubber units as well as any breakdowns or mechanical damage of the appliance elements caused by incorrect storage, transport, 

maintenance, installation or operation.

Summary of Contents for 830130V02





















Reviews: