This setting is only relevant when the device is controlled via DMX.
Press
[Menu/Setup]
repeatedly until the display shows
‘dxxx’
. Now use
[Up]
and
[Down]
to
select one of the following DMX operating modes:
n
‘2-ch’
(two channels)
n
‘3-ch’
(three channels)
n
‘4-ch’
(four channels)
n
‘7-ch’
(seven channels)
n
‘14-ch’
(fourteen channels)
n
‘26-ch’
(twenty-six channels)
This setting is only relevant if the device is serving as Slave in a Master / Slave configuration
and is not controlled via DMX.
DMX mode
Operating mode ‘Slave’
Operating
30
LED IP Bar 320/8 RGB DMX
LED Floodlight
