A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press
[Menu/Setup]
repeatedly until the display shows
‘Prxx’
. Now you can select one of the
preprogrammed automatic shows. Use
[Up]
and
[Down]
to select a value between
‘Pr01’
and
‘Pr22’
.
For programme Pr01, you can set one of seven static colours across all segments. Press
[Menu/Setup]
and use
[Up]
and
[Down]
to select a desired colour: red, yellow, green, cyan, blue,
pink, white. After selection, press again
[Menu/Setup]
to set the flash frequency. Use
[Up]
and
[Down]
to select a value between
‘FS00’
(slow) and
‘FS99’
(fast).
For programmes Pr20 and Pr21 you can set a static colour across all segments (background
colour) or a colour that lights up segment-wise (hopping colour). Press
[Menu/Setup]
repeat‐
edly until the display shows
‘1.xxx’
(background colour) or
‘2.xxx’
(hopping colour), respec‐
tively.
To adjust the speed of the selected auto show, press
[Menu/Setup]
repeatedly until the display
indicates
‘S.xx’
. Now use
[Up]
and
[Down]
to select a value between
‘S.01’
(slow) and
‘S.99’
(fast) or
‘SPFL’
(Flash effect).
To adjust the flash frequency, press
[Menu/Setup]
repeatedly until the display shows
‘F.xx’
.
Now use
[Up]
and
[Down]
to select a value between
‘F.00’
(slow) and
‘F.99’
(fast).
Operating mode ‘Preprog‐
rammed automatic show’
Operating
LED IP Bar 320/8 RGB DMX
27
LED Floodlight
