ö
#
$
Proceed as follows to connect the DMX-IP65 connectors:
1.
Insert the plug completely and straight into the coupling.
2.
Make sure that the flexible sealing ring has complete contact.
3.
Turn the union nut straight onto the thread of the coupling. Hand-tighten the union nut.
You can install the device on the wall, the ceiling or on the floor. Two mounting brackets and
the necessary screws are included.
Always work from a stable platform whenever installing, moving or servicing the unit. In doing
so, the area underneath the unit must be cordoned off.
Connecting the DMX IP65 con‐
nectors
Mounting options
Installation
LED IP Bar 320/8 RGB DMX
17
LED Floodlight
