This setting is only relevant when the device is controlled via DMX.
Press
[Menu/Setup]
repeatedly until the display shows
‘dxxx’
.
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use
[Up]
and
[Down]
to select a value between 1 and 512 (display shows
‘d001’
…
‘d512’
).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible first DMX address for the various DMX modes.
Mode
Highest possible DMX address
2-channel
511
3-channel
510
4-channel
509
7-channel
506
14-channel
499
26-channel
487
DMX address
Operating
LED IP Bar 320/8 RGB DMX
29
LED Floodlight
