Stairville DJ Lase GR-140 RGY MKII, User Manual

Page: 43 / 64

Press [FUNC] until the display shows ‘001’ . Now you can set the number of the first DMX
channel to be used by the device (DMX address). Use the [UP] and [DOWN] buttons to select a
value between 1 and 507. Press [ENTER] to save the value and to start operation in ‘DMX’
mode.
Make sure that this number matches the configuration of your DMX controller.
Press [FUNC] until the display shows ‘rEN’ . Press [ENTER] to confirm and to start operation in
'Remote control' mode.
This mode allows you to operate the device conveniently with the infrared remote control.
Make sure that the infrared receiver on the front panel of the device is not obstructed.
Operating mode ‘DMX’
Remote control mode
Operating
DJ Lase GR-140 RGY MKII
43