Stairville DJ Lase GR-140 RGY MKII, User Manual

Page: 42 / 64

Press [FUNC] until the display shows ‘Aut’ . The device operates in stand-alone mode and dis‐
plays a pre-programmed show that can optionally be controlled by the built-in microphone.
Use the [UP] and [DOWN] buttons to select the built-in show programme with or without
sound control (display ‘Sou’ or ‘Aut’ ).
To set the sensitivity and thus the response characteristic of the microphone for the built-in
show programme, press [ENTER] . The display shows ‘S 0’ . Use the [UP] and [DOWN] buttons to
select the settings ‘S 0’ (sensitivity = 0, sound-controlled mode off) or ‘S 1’ (low sensitivity) to
‘S 9’ (high sensitivity). Press [ENTER] to store the setting.
Please note that the laser is switched off if a sound controlled show has been selected but the
microphone does not receive any sound.
Press [FUNC] until the display shows ‘SLA’ . In this mode, the device exactly follows the opera‐
tion of the master that it is connected to. Press [ENTER] to confirm and to start operation in
‘Master / Slave’ mode.
Auto show mode
Master/slave mode
Operating
showlaser
42