Page 18
5. Pass the pulley underneath then over the top of
the 3rd pulley (P3).
P2
P3
6. Pass the bungee over the top then underneath
the fourth pulley (P4).
P1
P4
7. Insert 3 inches of the remaining end of the
bungee cord through the eye of the termination
clip then push the bungee into the tapered slot
below the eye. Pass the remaining length of
the bungee through the open eyelet then back
through the eye to lock the bungee in place as in
step 1.
TECH TIP:
Remove the clip from the pulley axle
to aid in attaching the bungee.
P2
P3
2
1
3
P2
P3
P1
P4
Final Bungee Routing Path
