Page 8
FUNCTION NOTE:
The 10-Series has a safety feature to help prevent users from accidentally increasing the machine speed to a level that is too high
for them. When pressing the level up button to increase speed, there are two stop points at level 10 and level 15 which function
as follows: when increasing level, the machine will not allow the user to increase the level past the stop point until the actual
machine speed has reached the set level. For example, if a user is at level 5 and repeatedly pressed the level up button, it will allow
the set level to go up to level 10, but no further until the actual machine speed has reached level 10. Once the machine speed has
reached the set level, the user can increase the level further.
CONSOLE KEY FUNCTIONS
Bluetooth Device Pairing with Bluetooth Button: Pushing the button puts the console into discover mode. The console
will be available for pairing for up to 60 seconds to pair with a compatible App. The button will flash while searching for
pairing, and the display will show the unique console code. Once a device is paired with the console, the light will stop
flashing and remain on to indicate the connection. Visit our website for a list of compatible Apps.
QUICK START Key: Enables manual operation using a default weight, SPEED and a default time limit.
NOTE: Default time speed and weight are adjustable through Maintenance Mode.
Numeric Keypad: Use to enter specific values for program parameters during program setup. During a program,
these keys may be used to change level.
Up/Down Buttons: Cycle between options during setup mode and adjust speed up and down during
workout mode
Fan Button: Cycles the fan between three settings: High, Low and Off
Pairing with Apple Watch: OpenHub consoles marked with this icon
have the capability to connect using
Near Field Communication (NFC) with Apple Watch (must be running WatchOS 4.2 or later). To connect, hold
the Apple Watch near the icon on the console (this is where the NFC reader is located). When the display and Apple Watch detect
each other, the Bluetooth button on the display will flash and then turn solid blue, and Apple Watch will ask user to confirm
connection with the display. Once connection is confirmed by user, it will finalize and data will begin to pass between console
and Apple Watch. It is possible to make this connection either before the workout begins (recommended), or at any time during
an active workout. At the end of workout, the connection will be terminated.
Note
: when Apple Watch is connected to display,
the Calories display window will display Total Calories, and the scrolling data window will display Active Calories periodically.
