background image

Transport and storage

12

222203 / 600160300010

2020-06-12·BA00·III·en·06

EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN

Linear Luminaire for Fluorescent Lamps

Series EXLUX 6001

For further technical data, see r-stahl.com.

6

Transport and storage

• Transport and store the device only in the original packaging.

• Store the device in a dry place (no condensation) and vibration-free.

• Do not drop the device.

Optional

Address module

Control input:

Rated voltage: 220 to 230 V 50 Hz AC/DC

Function:

Address and switching module for R. STAHL emergency lighting systems  

according to VDE 0108:

The module is used for monitoring individual luminaires and for the control of 

mains and emergency luminaires.

The module offers the following functions:

• Control of the luminaire (ON / OFF) and calling up the function

• Up to 20 addresses can be configured for each electrical circuit by 

means of a coding switch

• The type of connection (continuous light, stand-by light or switched 

light) of the luminaire is freely programmable

• Mixed operation within a circuit is possible

Breather

Breather 8162/1 from R.STAHL Schaltgeräte GmbH

The breather guarantees compliance with degree of protection IP64  

in all mounting positions. The breather may not be used in atmospheres with 

corrosive gases.

Technical Data

Summary of Contents for EXLUX 6001 Series






























Reviews: