222203 / 600160300010
2020-06-12·BA00·III·en·06
Technical data
11
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Linear Luminaire for Fluorescent Lamps
Series EXLUX 6001
Mounting / Installation
Cable glands
Connection
Spring clamp terminals
Standard: 5-pole: L1, L2, L3, N, PE
with address module: 5-pole: L+, N-, PE, L', N'
Clamping range:
1 x 1.5 to 6 mm
2
(solid)
1 x 1.5 to 4 mm
2
(finely stranded)
1 x 1.5 to 6 mm
2
(finely stranded with core end sleeve)
(2 free clamping units per pole available)
Through wiring
Assembly
Technical Data
Standard luminaire
Plastic:
2 x M25 x 1.5 cable entry 8161 and
2 x M25 x 1.5 stopping plugs 8290 (enclosed)
Metal:
2 x metal plates M20 x 1.5 connected by
means of PE for metal cable entries
Attention: cable entries must be ordered separately
Special
version:
max. 4 drilled holes for M20, M25, NPSM ½"
max. 2 drilled holes for NPT ¾"
Metal cable glands: M20 x 1.5, M25 x 1.5;
earthing metal cable entries
using metal plates
Standard
luminaire
with
Luminaries are equipped with internal through wiring.
Connection of ingoing and outgoing leads on
opposite sides is possible.
Terminals: See Tech. data
Wiring cross section of the supply line connection:
2.5 mm
2
for max. 16 A
(Observe service temperature)
Optional
without
On the connection side, there are 2 bores M25 x 1.5
for cable entries for through wiring of the connection line
(ingoing and outgoing leads on one side).
Standard luminaire
Standard:
2 x M8 insert nuts in the enclosure
Special
version:
Mounting grooves in the enclosure for use of fastening
and ceiling rails for variable luminaire mounting
(variable mounting distances for luminaires
Size 2: 320 to 480 mm;
size 4, size 6: 670 to 930 mm)
