218149 / 948260310010
2018-07-03·BA00·III·en·02
Mounting and Installation
27
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Temperature Input Module Zone 1
Series 9482/32
8.1
Dimensions / Fastening Dimensions
8.2
Mounting / Dismounting, Operating Position
8.2.1 Mounting / Dismounting on BusRail
Mounting on BusRail
Dimensional drawings (All dimensions in mm [inches]) – Subject to change
15254E00
9482/32
NOTICE
Malfunction or device damage caused by improper mounting.
Non-compliance may lead to material damage!
• Only install and operate the device in a vertical or horizontal position!
(Horizontal orientation: Reading direction from below)
05683E00
• Position the module vertically at the
intended slot of the BusRail and press
slightly to snap it into place.
• The module may no longer be
loosened without actuating the handle.
• Plug the pluggable terminals X1 and
X2 into the module and secure it
against loosening using safety screws
(tightening torque 0.5 to 0.6 Nm).
• If necessary, mount a partition to
ensure a distance of at least 50 mm
between the intrinsically safe and
non-intrinsically safe electric circuits o
r release the adjacent slot on the
BusRail.
64
[2,52]
128,5 [5,06]
68
[2,68]
70
[2,76]
96,5
[3,8]
98 [3,86]
BusRail
BusRail
Summary of Contents for 9482/32 Series
Page 69: ......