200291 / 8220601300
2015-04-15·BA00·III·en·02
Mounting and installation
11
Control and Distribution Panels
Series 8220
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
7.2
Mounting / dismounting, operating position
DANGER
Explosion hazard due to incorrect installation of the device!
Non-compliance results in severe or fatal injuries.
• Carry out installation strictly according to the instructions and national
safety and accident prevention regulations to maintain the explosion
protection.
• Select and install the electrical device so that explosion protection is not
affected due to external influences, i.e. pressure conditions, chemical,
mechanical, thermal and electric impact such as vibration, humidity and
corrosion (see IEC/EN 60079-14).
• The device must only be installed by trained qualified personnel who is
familiar with the relevant standards.
DANGER
Explosion hazard due to unauthorized cable entries!
Non-compliance results in severe or fatal injuries.
• Use only cable entries approved for the required type of protection.
• When selecting cable glands, observe the thread type and thread size
in the equipment documentation.
DANGER
Explosion hazard due to open holes or unused cable glands!
Non-compliance results in severe or fatal injuries.
• Always close drilled holes and unused cable glands using approved
stopping plugs or plugs.
• When selecting cable glands, observe the thread type and thread size
in the equipment documentation.
Dimensional Drawings (All Dimensions in mm [inches]) - Subject to Alterations
Type
A
B
C
C1
D
D1
E
F
G
H
8225/
.12
345
[13.58]
301
[11.85]
235
[9.25]
150
[5.91]
235
[9.25]
150
[5.91]
150
[5.90]
268
[10.55]
12
[0.47]
–
8225/
.22
470
[18.50]
426
[16.77]
360
[14.17]
275
[10.83]
360
[14.17]
275
[10.83]
275
[10.83]
268
[10.55]
12
[0.47]
–
8225/
.23
470
[18.50]
426
[16.77]
360
[14.17]
275
[10.83]
360
[14.17]
275
[10.83]
275
[10.83]
325
[10.83]
12
[0.47]
–
8225/
.72
470
[18.50]
426
[16.77]
360
[14.17]
275
[10.83]
480
[18.90]
395
[15.55]
395
[15.55]
268
[10.55]
30
[1.18]
–
8225/
.73
470
[18.50]
426
[16.77]
360
[14.17]
275
[10.83]
480
[18.90]
395
[15.55]
395
[15.55]
325
[10.83]
30
[1.18]
–
8225/
.32
590
[23.23]
546
[21.50]
480
[18.90]
395
[15.55]
480
[18.90]
395
[15.55]
395
[15.55]
268
[10.55]
30
[1.18]
–
8225/
.33
590
[23.23]
546
[21.50]
480
[18.90]
395
[15.55]
480
[18.90]
395
[15.55]
395
[15.55]
325
[10.83]
30
[1.18]
–
8225/
.35
590
[23.23]
546
[21.50]
480
[18.90]
395
[15.55]
480
[18.90]
395
[15.55]
395
[15.55]
410
[16.14]
30
[1.18]
–
8225/
.96
840
[33.07]
796
[31.34]
730
[28.74]
645
[25.39]
730
[28.74]
645
[25.39]
645
[25.39]
465
[18.31]
30
[1.18]
490
[19.29]
