11
TIMER:
Start and stop button for timing fogging.
UP:
Button for increasing numerical value.
DOWN:
Button for decreasing numerical value.
• Set values are automatically saved.
• Self-cleaning function : When the machine stops fogging,
please do not unplug the machine immediately, but wait 100
seconds to let the machine automatically clean the fluid left in
the pipe. LED screen will show as picture and slow flash.
• Standby
: After the end of the pipe clearing, Standby will
appear.
• If fluid is run out, full the tank with fluid and press “Manual
Fog” to reset.
Fluid inspection ON/OFF:
ON/OFF setting of automatic inspection of fluid volume.
1.
When this function is “0” means OFF, the machine
cannot inspect volume of the fluid. This means that
the machine will keep working even there’s no fluid.
2.
When this function is “1” means ON, the machine
starts this inspection function automatically. Some
points need to be paid attention to:
A.
80 seconds after being powered, the machine will
inspect if there’s fluid.
B.
If the machine detects no fluid, it needs 30
seconds to do judgement to make sure there’s
no fluid, and then stop working. The display will
show .
C.
If the machine detects no fluid during operation,
the machine stops working. At this moment, it is
allowed to supplement fluid in the tank and then
press “Manual Fog” button to let the machine
enter working status again.
S t b y
n o f
PI C L
F 0 0 0
