INSTALLATION AND USER MANUAL
200TDHW
2
V0REV1EN0218
1.
INTRODUCTION
This product, has been manufactured according to the European Quality Standards, incorporates
prime grade materials and its correct working has been tested before it leaves our facilities.
Through this Installation and User Manual, you will be guide towards the correct and safety
installation of the product. It is necessary to carefully read this manual before make any handling to
avoid problems arising from the misuse of the product.
The company reserves the right to modify the information included in this document at any time
without prior notice.
2.
GENERAL INDICATIONS
2.1.
Safety notes
-
The incorrect or inappropriate use of this product could lead to hazardous situations,
causing damage or injuries to the user, third parties or even to the product itself or
material goods.
-
The installer has the responsibility to install the minimum safety devices (hydraulic and
electrical) set out in this Manual. In case of failure, the lack of any device may cause
burns or other injuries.
-
The installer has the responsibility to inform the user about the function and placement
of the safety devices installed into the device and the installation.
-
The water outlet temperature could reach 62 degrees.Do not touch the pipes while the
system is working to avoid any risk of burns.
2.2.
Installer’s qualification
Since the installation of the 200TDHW involves handling coolant as well as carry out welding work, it
is needed the technical staff have the official certification that accredits them as authorized to
handle coolants.
The installer must explain the user the application of the product and the use and management of
the unit, and he should provide the user all the documentation supplied with the equipment.
2.3.
Package contents
The 200TDHW system comprises the following components:
-
Thermodynamic panel
-
Anchoring elements
-
200TDHW
