INSTALLATION AND USER MANUAL
200TDHW
19
V0REV1EN0218
11.12.
Antillegionella
The anti-legionnella feature reduces the risk of development of bacteria in the tank. When the water
heater is installed and in operation a process will permanently monitor the water temperature. The
process is applicable in all modes. Whenever risk conditions are detected that might cause the
development of bacteria, 200TDHW background will automatically perform a full water heat cycle
above 60°C.
Anti-legionella can be disable or enable in the installer menu.
11.13.
Child-lock
A long press simultaneously on
and
keys activate or deactivates the child lock protection.
The action is confirmed by the following display:
Child LOCK confirmation message Child UNLOCK confirmation message
11.14.
Information
“information” , selectable by pressing mode button, gives access to statistical information :
iFH 200 foreground instruction book
Z.I. Les levées, 38470 VINAY, FRANCE ,
Tel. +33 4 76 36 82 97, Fax +33 4 76 64 05 43
IFH 200 IB V1.3
- CONFIDENTIAL - This file is the exclusive property of COTHERM and cannot be in any case reproduced or communicated to
a third party
without Cotherm prior agreement
P. 9
CHILD LOCK
A long press simultaneously on
and
keys activate or deactivates the child lock protection. The action is confirmed by
the following display:
INFORMATION
“information” , selectable by pressing mode button, gives access to statistical information :
The usage of the heat pump in % during last 30 days
The usage of the heating element in % during last 30 days
Preliminary: Estimation of electric consumption in the previous 30 days of operation.(Not available yet)
Ex : the following screens shows 38 Kwh for past 30 days . The Heat pump was used 78% of heating time compare to 22% for the
heating element.
BACKLIGHT
The LCD display is backlight offering a high visibility comfort in dark condition. LCD backlight will be activated each time the
product is turn ON or on any key press.
Backlight will automatically turn off after a time out of 10s without user interaction.
PHOTOVOLTAÏC OPTION
iHPC enable the interface with a photovoltaic energy manager or inverter. With this option , when energy is available from the
photovoltaic panels, the water heater is forced to heat the water in order to store the free energy.
Heating on photovoltaic (so-
called “PV”) can be activated by the energy manager or the photovoltaic inverter when iFH is in Eco
Mode/ Auto mode or program mode. The water is going to heat up to the maximum heating capacity of the heat pump (62°C
maximum). In this configuration, heating element is not operational and PV characters are displayed.
Child LOCK confirmation message
Child UNLOCK confirmation message
