Form No. 003-2282 Rev G
2
1.
Important Safety Instruction
1.1.
An Important Notice
1.1.1 For Parallel System installation, please refer to Parallel System
Installation Guide Part number 003-2302
1.1.2 Because of
“small leakage currents” generated by the EMI filter of the
UPS, it is necessary to insure that the UPS is properly grounded before
connecting AC power to the input.
1.1.3 To ensure safety in all applications where a UPS is hard wired to the
Electrical Supply, ensure that the system is installed by a Qualified
Electrical Contractor.
1.1.4 The UPS has its own internal energy source (battery). When the UPS is
operating from battery power when no AC input is available, there will be
voltage at the output terminals.
1.1.5 Make sure that the AC Utility power source is correctly grounded.
1.1.6 Do not open the case, as there are no serviceable parts inside. Your
Warranty will be void.
1.1.7 Do not try to repair the unit yourself; contact your local supplier or
your warranty will be void.
1.1.8 Make sure that the rated input voltage of the UPS matches the
available AC mains voltage.
1.1.9 Use a certified input power cable with the correct plugs and sockets
for the appropriate voltage system.
1.1.10 To eliminate any overheating of the UPS, keep all ventilation openings
free from obstruction, and do not store anything on top of the UPS. Keep the
UPS 12 inches away from the wall.
1.1.11 Make sure the UPS is installed within the proper environment as
specified. (0-40
℃
and 30-90% non-condensing humidity)
