Form No. 003-2282 Rev G
21
E2
* Display shows
“Fail” in self-test
F
* Display shows
“220Vac” in Utility Input.
3.5.1.8. If the UPS should fail self-test, the LCD display will change from
Drawing D to drawing E2, then an error code or error status (section 2.2)
will be shown on the screen.
3.5.1.9. Start-up operation of the UPS is now complete. Make sure the UPS is
connected to the utility for charging at least 8 hours and the batteries are
fully charged.
