13
3. Unscrew the radio devices protective cap on the combination socket.
4. Plug the charging cable into the combination socket.
5. The keypad lights up red and the batteries start charging.
Note:
The batteries take 10 hours to charge with the radio switched
off and 18 hours to charge with the radio switched on.
Note:
The charger does not switch off automatically. Make sure you
unplug the charging cable yourself when charging is complete in order
to avoid overcharging the batteries, as repeated overcharging shortens
their service life.
Screwing on the antenna
Caution:
Never transmit without a correctly connected antenna!
Transmitting without an antenna can destroy the components!
Screw the antenna provided onto the device.
Caution:
To ensure the radio device is waterproof, you must place
the rubber gasket between the antenna and the housing when installing
it. The sealing cap must be screwed onto the combination socket.
Fitting the belt clip
Attaching the belt clip
Place the grooves of the belt clip on the guide rails at the top of the
housing and slide it down until the locking clip clicks into place.
Removing the belt clip
Press the locking clip (at the top of the belt clip) away from the housing
and slide the belt clip upwards to remove it from the radio device.
