12
SUPERMAX
®
VS Variable Speed Pump Installation and User’s Guide
Factory Reset
The drive can be reset to factory settings if necessary.
A Factory Reset will wipe out all of the saved user
settings that have been programmed, except for
the time of day. Be sure that it is necessary before
performing a Factory Reset, as the results are
immediate.
To perform a Factory Reset:
1. Stop the pump if necessary by pressing the
Start/
Stop
button.
2. Record all of the custom schedule settings using
Table 3
. You can find these setting by pressing
the “
1
”, “
2
”, “
3
”, and “
Quick Clean
” buttons and
cycling through all the screens. Also write down
the Priming Speed.
3. Press and hold the “
1
”, “
2
”, “
3
”, and “
Quick Clean
”
buttons for 3 seconds.
4. The screen will display “
FACt rSt
” if factory reset is
successful. See
Figure 13
.
5. Be sure to reprogram the schedule and priming speed
after the factory reset. The pump must be turned back on
with the
Start/Stop
button before it will run again. The
pump will run the programmed schedule upon initial start-
up.
Note
: Factory Reset can not be performed from a Keypad
Lockout state.
Speed
(RPM)
Duration
(Hours)
Start Time
(Time Clock)
SPEED 1
SPEED 2
SPEED 3
QUICK
CLEAN
Priming
Speed
Table 3:
User Programmed Schedules
Figure 13:
Drive Factory Reset
FACt
r5t
