
Safety and operating instructions
UM0432
8/53
2
Safety and operating instructions
2.1 General
Warning:
During assembly and operation, the STEVAL-IHM015V1
demonstration board poses several inherent hazards,
including bare wires, moving or rotating parts and hot
surfaces. Serious personal injury and damage to property
may occur if the kit or its components are used or installed
incorrectly.
All operations involving transportation, installation and use, as well as maintenance, should
be carried out by skilled technical personnel (national accident prevention rules must be
observed).
Skilled technical personnel
refers to suitably-qualified persons who are familiar
with the installation, use and maintenance of electronic power systems.
2.2
Intended use of the demonstration board
The STEVAL-IHM015V1 demonstration board is a component designed for demonstration
purposes
only
, and must not be used for electrical installations or machinery. Technical data
and information concerning the power supply conditions are detailed in the documentation
and should be strictly observed.
2.3 Installing
the
demonstration board
The installation and cooling of the demonstration kit boards must be in accordance with the
specifications and targeted application (see
Section 7
).
●
The motor drive converters must be protected against excessive strain. In particular,
components should not be bent or isolating distances altered during transportation or
handling.
●
No contact must be made with other electronic components and contacts.
●
The boards contain electrostatically-sensitive components that are prone to damage if
used incorrectly. Do not mechanically damage or destroy the electrical components
(potential health risks).
2.4 Electronic
connections
Applicable national accident prevention rules must be followed when working on the main
power supply with a motor drive. The electrical installation must be completed in accordance
with the appropriate requirements (for example, cross-sectional areas of conductors, fusing,
PE connections, etc). For further information, see
Section 7
.
electronic components distributor