Data transfer management (picture demo)
UM0853
40/49
Doc ID 16609 Rev 1
4.2
Writing a picture to your M24LR64-R
In the show Demo application window, go to the WRITE PICTURE TO M24LR64 area (see
Figure 92
) , and choose the picture you would like to upload into the memory. Click on the
picture to select it.
Figure 92.
WRITE PICTURE TO M24LR64
In
Figure 93
, the ST logo was chosen as an example.
Figure 93.
Picture to be uploaded
After selecting the picture, you need to choose which of the I2C or RF interface you will use
to upload it to the memory of the M24LR64-R device.
To upload it by I2C, click on
I2C
as shown below.
Figure 94.
Selecting I2C to upload the picture
You then have to click on the
Upload by I2C
button as shown in
Figure 95
.
electronic components distributor