UM0853
Data transfer management (picture demo)
Doc ID 16609 Rev 1
39/49
4.1.1
Check communication by RF
After clicking on
check RF communication
, the button changes to
running
as shown in
Figure 88
.
If the circle next to the
running
button is green, the communication by RF between the
M24LR64-R and the reader is OK.
Figure 88.
RF communication between the tag and the reader is OK
If the circle next to the
running
button is red, the communication by RF between the
M24LR64-R and the reader is NOT OK
Figure 89.
No RF communication between the tag and the reader
4.1.2 Check
communication by I2C
After clicking on
check I2C communication
, the button changes to
running
as shown in
Figure 90
.
If the circle next to the
running
button is green, the communication by I2C between the
M24LR64-R and the reader is OK.
Figure 90.
I2C communication between the tag and the reader is OK
If the circle next to the
running
button is red, the upload by I2C failed.
Figure 91.
Failed upload by I2C
electronic components distributor