How to control the RF and I²C channels from your screen
UM0853
34/49
Doc ID 16609 Rev 1
Figure 76.
Writing A1 to the memory array
Writing to the sector security status area
To write to the sector security status area, select
Sector Security Status (system)
and
type the address range to be written, then press the
Write
button. Addresses are managed
is the same way as for RF commands (see
Section 3.2.6: Read command
).
Please note that the I2C password has to be presented successfully prior to writing to the
Sector Security Status area.
Figure 77
shows how to write to the sector security status area.
Figure 77.
Writing to the sector security status area
Figure 78
shows the result of the operation.
electronic components distributor