ST M24LR64-R, User Manual, Page: 13 / 49

UM0853 How to control the RF and I²C channels from your screen
Doc ID 16609 Rev 1 13/49
Once the kit has been selected, the software checks that the selected readers are well
connected. A progress bar appears during the check as shown in
Figure 16 .
Figure 16. Connection check by the software
If a problem occurs, a window appears to indicate what the problem is:
●
If the development kit is used, the problem could be:
– medium-range RF reader not plugged in the USB port
– medium-range RF reader driver not installed
– I²C bus reader not plugged in the USB port
– I²C bus reader driver not installed
● If the demo kit is used, the problem could be:
– medium-range RF reader not plugged in the USB port
– medium-range RF reader driver not installed
●
If the starter kit is used, the problem could be:
– Short-range RF reader not plugged in the USB port
– Short-range RF reader driver not installed
3.1.2 Main menu
If all the drivers have been installed correctly, and the selected readers have been plugged,
the window shown in
Figure 17 appears.
The connection status of the readers as well as the version of the software are displayed at
the bottom of the window.
Downloaded from Elcodis.com electronic components distributor