Hardware Reference Guide
SST-PFB3-PCI
C.1 Loading Firmware
Firmware modules for the SST-PFB3-PCI card are supplied as .ss3 files, found on the software CD-ROM or on the
website at
http://www.mysst.com/
.
If you are developing a driver for the card or producing a stand-alone embedded application, the following section
describes the basic sequence of steps to manually load a module onto the SST-PFB3-PCI card.
Note
For register descriptions, refer to Chapter 3,
Hardware Register Details
.
C.1.1 Verify Card Presence
To verify the card’s presence, follow these steps:
1. Start up your computer.
2. Following release of the backplane reset, wait 2 seconds.
3. Query the BIOS/OS for a PCI card with Vendor ID 0x133D and Device ID 0x0033
(refer to Section 3.2,
SST-PFB3-PCI Configuration Space
for more information).
38
Loading
Firmware
©2003 Woodhead Software and Electronics, a division of Woodhead Canada Limited.
Document Edition: 1.0, Document #: 715-0060, Template Edition: 1.0, Template #: QMS-06-045.
Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com