Hardware Reference Guide
SST-PFB3-PCI
A.1 Introduction
The following errors may be reported during the card’s startup self-test. Error messages are posted in the message
area (0x0200) of the host interface and can be displayed using the status applications provided with the card.
A.2 HDR Messages
If HDR reads anything other than 0x41, the card hasn’t been found. If you continue to experience difficulties,
contact technical support (refer to Section D.3,
Technical Support
, for details).
A.3 Fatal Hardware Self-Test Flash Codes
Fatal failures during startup are accompanied by one of the following 8-bit fault codes, flashed on the HealthLed.
Table 14: LED Flash Codes
Value
Name
Description
01
BITTEST8
Bit test failure of an 8-bit memory range
02
BITTEST16
Bit test failure of a 16-bit memory range
03
BITTEST32
Bit test failure of a 32-bit memory range
04
ADDRTEST8
Address test failure of an 8-bit memory range
05
ADDRTEST16
Address test failure of a 16-bit memory range
06
ADDRTEST32
Address test failure of a 32-bit memory range
07-10
-
Reserved for future fatal start-up errors
11
JTAG_ UNKNOWN
JTAG programming error
12
JTAG_TDOMISMATCH
JTAG output data failed to match expected pattern
13
JTAG_MAXRETRIES
JTAG output data failed to match expected pattern after several
attempts
14
JTAG_ILLEGALCMD
JTAG programming file contained an unknown/malformed command
15
JTAG_ILLEGALSTATE
JTAG programming file commanded an illegal TAP state transition
16 JTAG_DATAOVERFLOW
JTAG
programming file contained a shift pattern in excess of MAX_LEN
* 8 bits
20-FF
-
Reserved for firmware-specific fatal errors
34
Error
Messages
©2003 Woodhead Software and Electronics, a division of Woodhead Canada Limited.
Document Edition: 1.0, Document #: 715-0060, Template Edition: 1.0, Template #: QMS-06-045.
Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions on page ii of this document.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com