SST Automation GT200-MT-EI User Manual Download Page 2

Page: 2 / 51

User Manual

Modbus TCP/EtherNet IP Gateway

GT200-MT-EI

WWW.SSTCOMM.COM

Catalog

1 Product Overview...................................................................................................................................................... 4

1.1 Product Overview........................................................................................................................................... 4
1.2 Product Features............................................................................................................................................. 4
1.3 Technical Specifications................................................................................................................................. 4

2 Quick Start Guide...................................................................................................................................................... 6

3 Hardware Description................................................................................................................................................ 9

3.4.1 Power Interface.................................................................................................................................. 11
3.4.2 Ethernet Interface...............................................................................................................................11

4 Instructions of Configuration Software................................................................................................................... 12

4.1 Notes before Configuration.......................................................................................................................... 12
4.2 User Interface................................................................................................................................................12
4.3 Equipment View Operation.......................................................................................................................... 14

4.3.1 Equipment View Interface................................................................................................................. 14
4.3.2 Equipment View Operation Mode.....................................................................................................14
4.3.3 Equipment View Operation Types.....................................................................................................15

4.4 The Operation of Configuration Interface....................................................................................................16

4.5 Conflict Detect..............................................................................................................................................22

4.5.1 Command List Operation.................................................................................................................. 23
4.5.2 Memory Mapping Operation.............................................................................................................24

4.6 Hardware Communication............................................................................................................................25

4.6.1 Ethernet Configuration...................................................................................................................... 25
4.6.2 Upload Configuration........................................................................................................................26
4.6.3 Download Configuration................................................................................................................... 27

4.7 Load and Save Configuration....................................................................................................................... 29

4.7.1 Save Configuration Project................................................................................................................29
4.7.2 Load Configuration Project............................................................................................................... 29

Summary of Contents for GT200-MT-EI




















































Search results

Summary of Contents for GT200-MT-EI

Reviews:

Related manuals for GT200-MT-EI

Brands by name

Popular brands

SST Automation GT200-MT-EI, User Manual

Search results

Summary of Contents for GT200-MT-EI

Reviews:

Related manuals for GT200-MT-EI

Brands by name

Popular brands