SRT SC12E, Parts & Operation Manual

Page: 9 / 48

Stripe Removal Technologies Scarifier SC12E User Manual
Improper connection of the equipment-grounding conductor can result in a risk of electric
shock. Check with qualified electrician or service person if there is any doubt as to whether
the outlet is properly grounded. Adhere to all local codes and ordinances.
NOTE:
In the event of a malfunction or breakdown, grounding provides a path of least
resistance for the electric current to dissipate. The motor is equipped with a grounded plug
and must be connected to an outlet that is properly installed and properly grounded. DO
NOT modify the plug provided on the motor. If the plug does not fit the outlet have a
qualified electrician install the proper receptacle.
Switch motor OFF before disconnecting power.
Do not disconnect power by pulling cord. To disconnect, grasp the plug, not the cord.
Unplug power cord at the machine when not in use and before servicing.
Starting the Engine/Motor for Electric Models
Be sure the “OFF” button is depressed on the motor starter box.
Hook up the correct voltage/phase electrical power source by plugging into the connector
provided. If the cord does not mate with the connector, consult a qualified licensed
electrician before continuing.
Verify that the electrical current being supplied is the proper voltage and phase required to
run the equipment.
Poisonous Exhaust
Gasoline and Propane Powered Models
DO NOT operate any gasoline/propane powered equipment without adequate ventilation.
Carbon monoxide is an invisible, odorless gas that can kill.
NEVER REFUEL A HOT ENGINE OR AN ENGINE WHILE IT IS RUNNING.
Only refuel a cool “stopped” engine in a well-ventilated area. Properly clean any spilled
fuel before starting the engine.
Gasoline is extremely flammable and poisonous. It should only be dispensed in
well ventilated areas, and with a cool engine.
Propane is extremely flammable.
Stripe Removal Technologies © 2006 All Rights Reserved