SRT SC12E, Parts & Operation Manual

Page: 3 / 48

Stripe Removal Technologies Equipment Safety Policy Statement
Stripe Removal Technologies (SRT) is adamant that safety is the highest priority for both our employees
and customers. When considering set-up and operation of any piece of equipment supplied,
manufactured, distributed, rented or serviced by Stripe Removal Technologies, the safety and protection
of people should always be the top priority.
All customers and employees should follow all of OSHA and local safety standards, requirements and
regulations.
The use of the following safety equipments are both recommended and required when operating any piece
of equipment supplied, manufactured, distributed, rented or serviced by Stripe Removal Technologies.

OSHA approved/certified eye protection (safety glasses).

OSHA approved/certified hearing and ear protection.

OSHA approved/certified foot protection (steel toed boots).

OSHA approved/certified respirator or breathing device.

OSHA approved head protection (hard hat).

Proper protective work gloves.

Proper protective clothing limiting skin exposure.
(The list is not meant to be all inclusive, please exercise sound judgments during operation)
The work area must always have proper ventilation to minimize the health and safety risks of propane and
gasoline emissions and airborne dust.
All SRT Equipments are engineered, designed and provided with dust control shrouds and vacuum ports.
It is strongly recommended that an approved dust containment system be connected to and used in
conjunction with all SRT equipment during operational use. SRT supplies, distributes, rents and services
dust control systems with HEPA filtration.
Extreme caution must be exercised at all times when electrical power is considered. All SRT
employees are prohibited from working on or hard wiring our equipments to any power source that
has not been provided by SRT. Any such work must be performed by a certified electrical
technician. No SRT employee is permitted or authorized to work on, operate or connect to our
equipment or equipment belonging to our customers to an electrical source that is not within OSHA
approved specifications. There are no exceptions to this policy! SRT also strongly recommends that
only certified electricians be permitted to deal with or manipulate electrical power sources within
our customers’ facilities or on their job-sites.
Finally, we at Stripe Removal Technologies cannot stress enough the importance of following
general safety practices, the utilization of appropriate safety equipment and the application of
common sense when operating equipment supplied, manufactured, distributed, rented or serviced
by SRT both on the job-site and in the field.