SRS Labs SR430, Manual

Page: 94 / 146

93
Remote Programming
mands received at once, queues cleared)
1 Unused
2 Query Error Set on output queue overflow (too many re-
sponses waiting to be transmitted, queues
cleared)
3 Unused
4 Execution Error Set when a command can not execute correctly
or a parameter is out of range
5 Command Error Set when an illegal command is received
6 URQ Set by any key press or knob rotation
7 PON Set by power-on
The Standard Event status byte is defined by IEEE-488.2 (1987) and is used primarily to report errors in com-
mands received over the communications interfaces. The bits in this register remain set until cleared by read-
ing them or by the *CLS command.
MCS STATUS BYTE bit name usage
0 Triggered Set when a record is triggered
1 Plot Complete Set when a plot is completed
2 Print Complete Set when a print screen operation is completed
3 Toggled Set when the accumulate mode toggles between
add and subtract
4 Scan Paused Set when the unit enters the PAUSE state
5 Inhibited Set when a record accumulation is inhibited via
the rear panel Inhibit input.
6 Unused
7 Unused
The MCS Status bits stay set until cleared by reading or by the *CLS command.