29
Damper and IFP Service
Apply Loctite to the first 3 threads of the damper shaft.
Install the sealhead assembly onto the damper shaft.
Install the top out plate onto the damper shaft.
Install the compression shim stack, top out plate, and check shim stack
onto the damper shaft.
NOTICE
Keep the piston assembly parts in the order they were removed. Do
not separate any parts from the piston assembly.
If any piston assembly parts are installed in the incorrect order,
the piston assembly, including the tune shim stacks, must be
reassembled in the correct order for proper shock function. Refer
to the
Rear Suspension Shim Tuning Guide
for piston assembly and
shim stack configurations.
27
Loctite 2760 Threadlocker (Red)
28
29
30